Fitting A Cat Flap

Installing a cat flap might seem intimidating but it's simple to install with the proper instructions. Decide how high you'd like the flap to be (normally, it is at belly height). Mark this point on your door and use the template provided to help you drill.

If you have a kitten that is still a baby then gently prop the door slightly open and encourage it to go through. Reward it as it passes through.

Take a measurement of the door

A cat flap lets your pet to enter and exit your home at the time that is convenient for you. This can help with keeping your cat healthy by ensuring that it is exercising as well as being able to get back inside if trapped outside in the rainy weather, especially in winter. It can also reduce the amount of time you'll have to allow it in or out and can keep your home safe by letting you know when it has gone out.

It is crucial that the flap for your cat is correctly fitted to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). It is important to measure the height of your pet's belly and the doorway of your house to ensure that the flap is at the correct height. You can alter the height of your flap when your cat is smaller or taller than the average.

Next, use a spirit-level to mark the center of the door. This is where you will install the flap. Then, using the mark as an outline, cut the contour of your flap with the aid of a Jigsaw. After you've cut the area, sand the edges of the door to create smooth surfaces and drill any fixing holes required.

Installing a cat flap ought to not take more than two hours. However, the process can be a bit more difficult when you have to install it inside the door of a uPVC or composite door as these doors come with a wide range of thicknesses which can affect how the holes are cut and what they are fixed into. We recommend that you call an expert when this is your first time working with glass.

Measure Your Cat

A cat flap will save you from hours of hearing your pet's cries for you to let it out or in. This is especially helpful if you are at working all day and your cat has to stay in the waiting room until you come home in all weathers.

It is important to measure your cat's measurements first before you attempt the installation. It might seem like a simple task, but it's important to make sure you measure the right measurements. If not, your cat might find it difficult to use.

First of all, make sure that your cat is calm and not stressed prior to taking the measurements. You'll need to hold them in a way that they are not able to move, and make sure that the ruler or measuring tape is flat against their body, not arching in any places. Keeping the measuring tape or ruler against their body from the top of their head to the bottom of their tail can allow you to determine an accurate measurement.

Once you've got the measurement of your cat, it's time to look at the door and decide on where you want to place the flap. The flap should be placed at the level of your cat's belly. This will allow them to pass through the door without much effort. This will also prevent the flap making a lot of noise as it swings open and closed.

You will also need to consider the thickness and structure of the uPVC door or composite. While timber doors are all of the same thickness, uPVC and composite doors can be very different in their overall design, which can make fitting the cat flap more difficult as you will need to ensure that the hole you cut is the correct size for your pet.

It is also worth reading through wall cat flap the directions that come with the cat flap kit to find an illustration template that can be used to determine the location of the hole inside the door. This will enable you to determine where the hole must be located and make sure that the template is set correctly on the door. It is also beneficial to employ a spirit-level to ensure that the template is perfectly against the door.

Cut the Flap

Before you can install your cat flap, you'll need to cut the door's panel to make a space big enough to accommodate it. This can be a challenging job, and it is recommended that you seek the help of a professional cat flap fitting service for this job should you not have the expertise or knowledge to tackle it yourself. It is also recommended to read the instructions included with the kit to discover how to do this properly.

To do this, you will need to determine the height of your cat's or kitten's belly and use this as a reference point. A good guideline is to place the flap of your cat about 10 centimeters off the ground, as this is roughly the average height of the cat's belly. This way your cat flap installation near me can move through the flap comfortably and also give any other cats or curious neighbours difficult time trying to get in or out.

Once you have determined the location where the cat flap needs to be located, mark the location on the door using pencil. If your kit comes with an outline of paper, place it on top of the door and use the markings to drill holes into each corner of the template. Then, you should be able to cut out the shape of the template and replace it with your cat flap.

If you are installing your cat flap in the form of a door made of wood or upvc door panel with cat flap fitted, you can do it yourself if are confident enough to use a Jigsaw. Be cautious not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw to cut the panel into a square or circle according to the design of your cat flap. Be patient and don't force the jigsaw into cutting faster.

After the hole has been made, carefully place the cat flap into its new home. Make sure it is firmly secured. If the flap is fitted with screw caps put them on the protruding bolts. Once the screws have been installed then sand the rough edges and apply sealant to any gaps. This will prevent draughts from entering your home.

Install the Flap

If you have a basic cat flap, you can open it and encourage your pet to use it by putting a little bit of cat food on the outside of the door. You can also try pushing the cat using the help of a stick or your hands. Once your pet has become accustomed to moving through the flap, it will be able to come and go as it pleases. This allows you to let it in and out at any time it wants.

You can fit the flap onto an upvc door panel cat flap or glass door although this may not be exactly the same as fitting it into a wooden external door because the upvc door panels with cat flap and glass doors don't have a consistent thickness. This can have a significant impact on how you cut the hole for the flap, and could affect the way your flap is fitted correctly after it has been put in place.

Based on the type of cat flap you select It may come with its own mounting kit and a template that will show precisely where to drill the holes for it. If the kit does not include a template you can make one yourself. It's important not to use the jigsaw to hard when cutting, so that it doesn't create a larger than needed hole in your door.

The majority of cat flaps are rectangular or square in shape but there are also some which are circular and these are typically more difficult to place. If you have a circular flap, it's essential to make sure the hole is in the correct position on your door, because if it's not, the cat can't use it and could be left outside all day (or even night).

Certain models of cat flaps come with locks that permit you to control the time your cat comes and goes. They are helpful for pets who are afraid of going out in the dark or returning in the dark. They can also be useful if you work all day. Some locks can be used for access or exit, and others can be locked both ways. This is helpful for older cats or sick cats who do not want to go outside in bad weather.