The 10 Most Terrifying Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor UPVC window repairs where they could be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is substantial, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to access the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window repairs to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close the window and then perform a test fit. The corner joints of the sash need to align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and UPVC Window Repairs impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is very easy to change a window hinge however it is easier if someone helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window repair near me in a particular manner or because of inadequate installation at the factory. Sending us photos through our website can often solve the issue. We are happy to provide suggestions.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the possibility of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges, also due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. If they are beyond repair, it might be required to realign them. The interlock may be misaligned. This happens on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult a professional immediately.