20 Myths About Upvc Window Handle Replacement: Busted

UPVC Window Handle Replacement

Replacing a damaged window handle is a easy process, and, with the right tools, it can be done quite quickly. It is essential to know what kind of handle you have and its spindle size before purchasing an alternative.

Older uPVC windows have cockspur window handles which have an extension spur that can the lock of a wedge cockspur striker plate. These can be left- or right-handed, and must match when replaced.

What kind of lock or handle do you have? I have?

There are a myriad of upvc window locks and handles each with its own advantages and purposes. The type of handle you own will determine if your locking mechanism is efficient and if it is easy to open windows. With time and regular use, upvc window handles can become damaged or worn out, rendering them less secure and efficient. In some instances, they may even fall off completely. It is crucial to fix the handles on your window made of upvc as soon as you begin to notice them falling off. This will help prevent burglaries, and keep your house safe.

Luckily, replacing your window handles made of plastic is a relatively simple task that is achievable by everyone. With a few basic tools and the right information it's a simple procedure that shouldn't take longer than a couple of minutes. You will need to be aware of the type of handle or lock that you have on your window. This will help you select the appropriate replacement double glazing window.

Inline Espagnolette Handles

They are typically found on the side of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles come with a spindle running through the middle of the handle to the window frame to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles have a single screw that is used to secure the handle to the frame and are not as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles in that they can be rotated to open the window and then tilted to the window to let air circulate. They feature a 7mm spindle on the back and are available both in left and right-handed versions.

It is crucial to determine the size of the spindle when purchasing a Replacement Window Locks handles made of upvc. Not all are the exact same size. Drop something in the middle of the hole to measure the length. This is the maximum size of spindle that will fit into your windows.

What is the spindle?

uPVC window handles function similarly to doors. By turning the handle, you are able to operate a latch within the frame. This unlocks the window to allow it to be closed and opened. But, at times, these handles can become damaged, particularly when they are frequently used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it properly.

There are a variety of uPVC handles to choose from, including Espag, Cockspur and Spaded handles. They are designed to fit inside the uPVC frames in different ways and each handle type utilizes a specific spindle to lock the mechanism to the window. It is essential to determine the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.

You can determine the type of uPVC handle you have by looking at the base section of the handle. A snap-in cover is over the screw that holds the handle's base in place. After removing this and you'll be able to observe the second screw that holds the base of the handle in place. After both screws are removed you should be able to pull the handle away from the uPVC window.

Once you have removed the uPVC window handle you need to remove the spindle you have removed from the locking mechanism. Note the length of the spindle. You will need to buy a glass replacement for window of the same length as the handle that was originally used and locking device.

The primary issue with window handles made of uPVC is that the spindle gets worn-out and is unable to longer function properly with the locking mechanism. This could be due to corrosion, damage caused by frequent use, or the locking mechanism becoming looser. If this occurs, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Window handles can become damaged or destroyed over time. It is important to fix them as quickly as possible to ensure your safety. It is easy to replace a damaged or worn handle. The task can be accomplished in less than one minute without the need for any special tools.

To remove the old handle, you must first remove the screw located at the bottom of the handle. Once the screw has been removed, the handle will be removed. There is another screw located at the bottom of the handle's base and this can be removed too. After these two screws have been removed, the handle can be detached from the base of the window.

After the handle has been removed, you can take the new handle and align the fixing holes with the holes that are present in the window frame. If there is a cap or sticker on the new handle remove it if required and screw the handle in the appropriate position. Once the handle is set, it is crucial to verify that it is working by turning the handle and ensuring that the lock mechanism activates.

Espag handles have spindles that extend out of the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows come with a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.

Once you have installed the new handle, insert the spindle into the window lock and tighten it. When the handle is fixated then replace the snap-in cover and screw cap (if applicable). The handle is now ready for use to use, so try opening and closing the window several times to check that it works well and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult and the process is actually very simple. All you need is a screwdriver, and a little bit of patience. First, make sure the old handle is unlocked. Remove any visible screws. You can also replace them using screw caps. After removing the handle and you are ready to take a note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the kind of handle that you will require to purchase.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They feature a spindle that runs through the handle, and is responsible for a locking mechanism within the frame of the window. Once the handle is turned it releases the latch on the window, allowing it to open. In regular use and time, espagnolette handles may become damaged.

Cadenza handles are a second type of uPVC window handle that is commonly used on tilt and turn windows. They have an extended blade that works the multipoint locking mechanism inside the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced using the same method as you would for espagnolette handles however, ensure that the new handle is not angled and flat.

Once you have selected the correct handle, you can align the new handle to existing screw holes before screwing it in place. Then, put the screws on and test the new handle. This is accomplished by moving the handle from the locked to the unlocked position and vice versa several times. If you have any issues, it may be beneficial to speak with a professional to see if they are able to assist in resolving the issue. They can offer advice on how to solve the issue in a timely and efficient way.