How The 10 Most Disastrous Upvc Window Handle Replacement-Related FAILS Of All Time Could Have Been Prevented

UPVC Window Handle replacement glass for a window

Replacing a broken window handle is a relatively easy task and with the right tools it can be done quickly. It is important to identify the handle's type and spindle's length prior buying the replacement window panels.

Older uPVC windows feature cockspur window handles which have spurs that protrude to secure a wedge-shaped cockspur striker plate. These can be left- or right-handed and must be compatible when replaced.

What type of lock or handle do you have? I have?

There are a variety of window handles made from upvc and locks, each with their own benefits and purposes. The type of handle that you have will determine if the locking mechanism you have is effective and if it is easy to open the windows. As time passes and with regular usage, the window handles made of upvc are prone to wear or damage. out, rendering them less effective and secure. In some instances they could even be completely removed. It is important to repair your window handles made of upvc as soon as you notice them falling off. This will help to avoid burglaries and keep your home safe.

It is a good thing that replacing your window handles made of upvc is a fairly simple job that is achievable by nearly everyone. You'll need some basic tools, but with appropriate knowledge, it's an easy task that will take only a couple of minutes. To get started, you will need to determine the kind of lock and handle that you have on your window to help you find the perfect replacement glass windows.

Inline Espagnolette Handles

They are the most popular type of upvc handles and are typically located on the outside of your window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that goes through the center of the handle and then into the frame of the window to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows replacement glass and have distinct hook-shaped designs. Cockspur handles are held to the frame of the window by one screw, and are less secure than other types of window handle.

Tilt and Turn Handles

The tilt and turn handles are different from other upvc handles because they can be rotated for opening the window, and then tilted to the window to let air circulate. In general, they have a 7mm spindle on the back of the handle and are available in both left and right handed versions.

It is crucial to determine the spindle size when buying new upvc handles. There are a few that are the exact same size. Drop something into the middle of the hole to check the length. This is the maximum spindle length that will fit your window.

What is the spindle?

uPVC window handles function similar to doors, by turning the handle to open an opening inside the frame. This opens the window so that it can be shut and opened. However, in some cases, these handles can become damaged, particularly when they are used frequently or exposed to harsh weather conditions. This can leave you needing to replace your uPVC handles for windows as they may not be able to operate the window properly anymore.

There are a variety of uPVC handles that are available, including Espag, Cockspur and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle style uses a different spindle to lock the window mechanism. It is important to identify the kind of handle that is installed on your uPVC windows to ensure that you replace it with the right one.

The base of the handle will inform the type of uPVC it is. A snap-in covers should be over the screw that holds the handle's base in position. Remove this and then you should be able to see the second holding screw located at the opposite end of the base section of the handle. After both screws are removed you should be in a position to pull the handle away from the uPVC window.

Once you have removed your uPVC window handle, you will need to remove the old spindle from the locking mechanism. Take careful note of the length of the spindle, as you'll need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The primary issue with uPVC window handle problems is that the spindle gets worn-out and is unable to longer operate the locking mechanism. This can be due to damage from constant use or a loosening of the locking mechanism or even corrosion that occurs over time. When this happens it is necessary to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.

How do I remove the handle that was previously attached?

Over time and through everyday use, window handles can become damaged or broken, and when this happens, it is essential to fix them as soon as you can to ensure the safety of your home. It is easy to replace a worn or damaged handle. The job can be accomplished in under a minute without the need of special tools.

To take off the handle, you first need to remove the screw at the base of the handle. Once this is removed the handle can then be removed from the base section. A second screw is situated at the base of the handle. This too can be removed. Once both of these screws are removed the handle can be completely detached from the base section of the window.

After the handle has been removed, take the new handle and line up the fixing holes with the holes present in the window frame. If there is a cap or sticker on the new handle, take it off it if necessary and then screw the handle into place. Once the handle is in place, it is crucial to verify that it works by turning the handle and making sure that the lock mechanism is activated.

Espag handles come with a spindle which protrudes from the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the frame's outer or transom bar cross member within the window.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it down. When the handle is fixed in place, replace the'snap in' cover and screw cap (if applicable). The handle is now ready for use to use, so try opening and closing the window several times to check that it functions well and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't a big deal and the process is actually very simple. All you require is a screwdriver and a small amount of patience. First, make sure the handle is not locked. Then, remove any screws visible. You can also replace them with screw caps. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is important as it will determine what kind of handle to purchase.

Espagnolette handles are the most commonly used type of handle used on uPVC windows. The spindle passes through the handle to control the locking mechanism inside the window frame. The handle releases the latch, allowing the window to open. When used regularly and time, espagnolette handles may become damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism within the window. They are more secure than the espagnolette handles because they are able to open from the inside. They can be replaced using the same method as espagnolette handles, however you will need to ensure that the new handle has a curved blade as opposed to a flat one.

Once you've decided on the right handle for you then you can place the new handle with the screw holes and then screw it in place. Then, put the screws on and test the new handle. This is accomplished by moving the handle from the locked to the unlocked position and vice versa several times. It might be worthwhile to speak with an expert to see if you can resolve any problems. They will often be able to guide you on the best approach to solve the issue in a quick and efficient way.