In Wall Fireplace Tips From The Best In The Industry
In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace
An in wall fireplace stove provides an elegant and polished look without the cost of mantles. It is one of the most simple electric fireplaces to set up.
There are a few things to consider before buying an in-wall fireplace. To get the most value from your investment, consider these tips for a successful purchase:.
Height
It may seem like a simple issue however, determining the height of your fireplace is among the biggest decisions you will make. The height of your fireplace can affect everything from how it fits in a room to its visibility. The fireplace might appear strange if it is raised too high. It will also diminish its aesthetics. A fireplace that is too low could appear unnatural within the wall space.
Electric fireplaces can be mounted at various levels. The majority of people place their fireplaces in a seated position at eye level. This requires a height between 40 and 42 inches. Some people mount their cheap fireplaces underneath their TVs. This can be an attractive alternative.
However, the exact size of your fireplace will depend on several factors, including the dimensions of the room as well as the length of the wall you'd like to put it. The larger a room is, the more spacious it will appear, and this might mean that you are able to fit an even larger fireplace. This is also true for the length of the wall, since a longer wall can accommodate a fireplace that is larger.
Another important factor to consider is how you plan to make use of your fireplace. If you plan to use it for decorative purposes, then a lower height is best. If you plan to use it to heat your house you must ensure that the fireplace is strong and tall enough to meet safety standards.
It is essential to choose the proper size for your fireplace to ensure that it is in line with your decor and be simple to clean or fill. You can always ask an expert fireplace installer to help you if you are unsure about the best height to choose. They can suggest the best height for your fireplace, based on their knowledge and your home.
Depth
It is crucial to be aware of the depth of a fireplace when you are planning to place it in an recessed position. If you are going to cut through your wall fires, make sure that you have enough space to accommodate the interior design of your fireplace (the smoke shelf that is above the firebox, the flue that rises through the roof, and the fireplace itself). You should also consider the space you have available for the surround, and whether you want a fireplace mantle.
A lot of the latest electric models of fireplaces have the depth of being almost concealed, creating an almost "built-in" appearance. The Panorama Bi-Deep series is a fantastic example of this type of electric fireplace that is wall-mounted. It has a 5.8-inch deep that allows viewers to see the flames, the ember bed, but not the frame. It is also equipped with a range of media packages including natural looking driftwood logs, white pebbles, or crystals made of clear glass that reflect the flames and improve the ember bed.
Wall-mounted gas fireplaces are also available in shallow and deep models. But, when deciding the depth of your fireplace, it is crucial to remember that these units operate as a heat source that can be used for supplemental purposes and must be properly vented by an experienced professional. The length of the vent pipe, the size of the flue, as well as the distance between the stove and the vent are all elements that should be taken into consideration when determining the depth of a fireplace made of gas.
Whether you choose a surface mount or a recess-mounted installation, it is important to read and follow the instructions of the manufacturer when installing your fireplace. A professional installer is recommended in the majority of instances. It is good to have an extra person on hand when installing a gas fireplace.
Addition of an in-wall fire place to your home is a fantastic option to enhance it and add an atmosphere. It can also lower your heating costs. Additionally, it's a great option if you aren't able to install a traditional fireplace in your home because of the space restrictions or the location of your existing chimney.
Surface Mount
Surface mounts are an excellent option if you don't want to or aren't able cut into the wall to install an electric modern fireplace. They also provide a sleek, built-in appearance. Certain models, such as the Allusion line, can be mounted partially recessed in the wall without compromising on heat output or aesthetics.
To start the installation process, identify the area where you want your fireplace to be located and mark the area using a pencil on the wall where the bracket will be installed. Utilize a stud-finder to find the studs, and place each bracket in front at least one stud for stability. If a stud isn't within reach or won't work for your fireplace, make use of anchors for the drywall to support the mounting bracket.
Once you have marked the location of mounting brackets on the wall and then use a power drill to install them and make sure they are in alignment with the studs. You can use plastic anchors or studs to secure each bracket. Once the mounting brackets have been put in place, lift your fireplace, then hang it on the wall bracket. Once it's secure, verify the position of your fireplace to make sure that it is straight and not crooked within the opening.
Before proceeding with the installation, plug in your fireplace and check that all the features are functioning correctly. Turn on the flame and light up the flames, play around with embers, heat, bed lights and more. Once you're happy with the results you can now install your floating mantel.
Depending on the model of your fireplace, you will either need to connect the wire connection to the appliance connector on the bottom of the mantel, or if it has hooks or slots connected to the slots on the mounting brackets. Once you've done this then, refer to the owner's manual to find specific instructions on removing the front glass panel and inserting it into the opening.
Once you've removed the front panel of your fireplace and inserted it into its opening, follow your instructions in the manual to complete the install by replacing the glass front and adjusting the height if necessary. If your fireplace is equipped with ember bed media, place it over the top grille to create a natural appearance. Secure it using the screws included.
Plug-In
These electric fireplaces do not require chimneys or vents like traditional wood-burning fireplaces. They plug into standard outlets and provide additional heating for rooms that can be up 400 square feet. They also come with a variety of heating and flame settings, to allow you to customize the ambience. Some models feature LED lighting effects that highlight the ember bed and the fire. Some models have an upper grille that hides the manual controls, however they can easily be opened to reveal buttons.
Electric fire places with plug-ins can be installed directly on the wall or recessed to create an appearance of a built-in. These units are usually simpler to install than mantel fireplaces. Some models come with a pedestal to allow you place the fireplace on flat surfaces like dressers or buffets. Included are the remote control, mounting hardware, and a log set. Based on the model, electric fireplaces may include both heating and flame options that can be turned off for year-round ambiance.
Certain models come with privacy glass that can be easily adjusted from fully transparent to partially transparent. This makes these models popular for walls that separate common spaces for entertainment, british fires such as living and dining areas. These models can be used in bedrooms, where a fireplace is a cost-effective method to warm up a room and keep it private.
Although plug-in electric fireplaces don't need to be hardwired like built-in versions they must be mounted within a wall that is at least free of studs and able to support the weight of the fireplace. Some models come with a kit that includes a pre-wired cord and a specially designed bracket to make the installation process easier. This kit can be used for either drywall installation or concrete installation.
If you opt to install your electric fireplace in a wall ensure that it is located near an outlet. Based on the model, plug-in electric fireplaces can be connected to outlets that are connected to the same circuit or a separate circuit for your electric fireplace. It is suggested to choose a different circuit, so that all other appliances in your home operate on the same voltage. This could cause a trip to your breaker.