10 Saab 9-3 Key Replacement Tricks All Experts Recommend

How to Replace the Replacement Key Battery For the saab key replacement near me 9-3

saab 93 replacement key owners have a distinct set of steps to take to add an additional key. This requires the use of a handheld computer, known as Tech-2 which is used by the dealer. Then, a new transponder and key are required to be purchased.

Change your keys regularly to prevent one from wearing out more than the next. This will also help to keep your keys in top shape.

Replacement Case

The new key fobs are not like the old saab 9-3 key not accepted contact service keys. They're equipped with electronic devices which make it hard to copy. This has made car theft a lot more difficult than it was twenty years ago. However, it has also made the replacement of lost keys a more expensive task.

Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. If one is lost it costs a lot to add another to the car because it involves replacing the CIM module and programming the locking cylinders. Dealers charge between $100 and $200 for this.

There are some ways around these costly. Some parts retailers will find the code on a spare key (usually the same one that opens the doors and turns the ignition) and cut a brand new key blade out of metal for a fraction of the dealer's cost. The key must, however, be identical to the original in order to function in your vehicle.

Follow these steps to replace the case. You'll need an flathead screwdriver and patience. Utilizing the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. After the case is open take the electronics out and place them into your new case. Make sure to insert the correct key and badge back in the case too.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. This DIY video from YouTube Cyclone Cyd shows how to replace the battery in the remote key fob in just four steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.

This button is usually placed just below the saab replacement key logo on the back of the fob. This button is typically located on the back of the fob next to the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This should be enough to open the fob's case to allow you to replace the battery.

After you have installed the CR1632 batteries, you can rebuild your remote key fob. You can then program it into your car. The whole process should not take more than one hour. It is a very simple procedure that doesn't require any special tools.

The procedure is a little more complicated if you've lost your key, but still possible. The dealer must first read the VIN of the vehicle, and then purchase an alternative TWICE module, as well as a key blade with the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Key Replacement Fob

The key fob contains batteries that are used to lock and unlock your vehicle. Batteries have a finite lifespan and will eventually die. This is a problem that occurs with all vehicles, and the good news is that you can change the batteries in many key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronic components installed. It is easy to open the case and replace the batteries. It's important to note that you'll have to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. The case should split when you rotate the screwdriver around it.

If you're ready to replace your keys, make sure you have an extra set on hand. This will save you lots of money. If you do have a spare, you can ask the dealer cut the new key and program it to your car, which is cheaper than replacing the whole key fob.

If you don't have a spare you can add another key to your car, but this will require a lot of research and effort. The cost for adding a second key is about a few hundred dollars and it also requires programming of the car's computer. This can be done by a professional, but it's a costly option for the majority of owners.

Replacement Ignition

The new Saab 9-3 Key Fob Programming 9-3 uses a more sophisticated alarm system based on a key code. This means that when you lose your sole working key, acquiring an additional one could be extremely expensive since the car has to have a special computer module fitted and must also be specifically programmed to accept an extra key. Even dealers can charge hundreds of dollars to program an entirely new key, if they are unable to do it.

Dealers will charge you a premium to replace your car computer (also called the CIM or saab ignition key replacement twice) If you lose the only working key. Instead we can reprogram the EEPROM in your current car computer to prepare it for a new key, saving you over 50% of the amount you spend at a dealer.

If you've owned a SAAB 9-3 for an extended period of time you are aware that the ignition keys are not very durable. If your ignition key isn't functioning properly, you must consider replacing it. They can become very sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as complicated as it seems and can be done quickly with the appropriate tools.