Repairs To Upvc Windows: 11 Things You re Forgetting To Do

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the distance between the window and the door is substantial, you may need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues that include sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window repair near me is difficult to open or it blows open with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is very easy to change a window repairs near me hinge but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation in the factory. Sending us a picture through our website can often resolve the problem. We are always happy to provide assistance.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the possibility of a window sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your upvc window repair window.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. If they're beyond repair, it may be required to realign them. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be put on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional immediately.