Five People You Should Know In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and Upvc Window repairs protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass so that any shards fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the distance between the door and the window is substantial, you may need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close your window repairs and do a test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread across the home.

It is also important to note that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be the hinges that are at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It is very easy to change the hinges on a window however it is easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also be misaligned due to wear, creating gaps between the frame and sash. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional immediately.